http://www.rewind-bits.co.uk/rss/catalog/tag/tagName/gameboy/ Thu, 09 Sep 2010 20:35:22 +0000 Zend_Feed en_GB http://blogs.law.harvard.edu/tech/rss http://www.rewind-bits.co.uk/cr1220-tagged-lithium-battery-game-saves.html This battery will fit into all gameboy, gameboy color, gameboy advance cartridges with minor modification (short length of wire to connect one leg to the solder pin). A much better permanent way to fix flat save batteries in gameboy games. The solder tags ensure easy soldering and avoid explosion of battery due to overheating from direct soldering. Please be sure to wear safety goggles when soldering this item, in the event that you overheat the battery and cause it to pop (although this is unlikely if you take care and use a low power iron) ]]> Thu, 09 Sep 2010 20:35:22 +0000 http://www.rewind-bits.co.uk/cr2025-tagged-lithium-cell-game-saves-gameboy.html Symptom of failure of game save battery is a corrupt save file, or save files that disappear when the power is turned off on the console. Occasionally, the cartridge won't boot properly when the battery is flat (seen in Zelda on the SNES). Normally suitable for Gameboy and GBC cartridges, the legs typically need a little modification (bending) and a short length of wire (appx 3mm) will be needed to complete the circuit. This is due to the legs being in a slightly different orientation to the originals. You should check the battery type in your game first, as a smaller battery is available, CR1220, if space is limited. ]]> Thu, 09 Sep 2010 20:35:22 +0000 http://www.rewind-bits.co.uk/gameboy-printer-paper-new-sealed-rolls-pk-3.html three rolls of printer paper for the Gameboy Printer, this paper is brand spanking new and stock is very limited. The paper is adhesive backed. One roll of each of white, yellow and blue. up to 180 pictures from each roll. ]]> Thu, 09 Sep 2010 20:35:22 +0000 http://www.rewind-bits.co.uk/gbc-gameboy-color-replacement-screen-lens-340.html A replacement screen lens (the plastic part that scratches easily) for a Gameboy console. It does not contain a replacement LCD, just the plastic cover. The LCDs do fail on the DMG-01 gameboy model so please check yours works before changing the screen! Easy fit - just remove the old part CAREFULLY with a fine screwdriver, and peel and stick the new part. NOT suitable for any other gameboy models - check this category for those screens. ]]> Thu, 09 Sep 2010 20:35:22 +0000